OSI

SF450 Heavy Duty Subfloor Adhesive

A professional, heavy-duty grade adhesive developed for glued subfloor systems.

SF450 Heavy Duty subfloor adhesive can be used in most interior and exterior construction projects either on the job or the production line.  Bonds all wood to wood assemblies, dry, wet, or frozen. Primarily designed for on-site bonding of subfloor and plywood decking to joists during cold weather. Suitable for use on plaster, metal, masonry, concrete, wood, brick, ceramic tile, slate, treated lumber and most other projects requiring an adhesive. Ideal for use in prefab or modular construction.

For Best Results

Not for use on polyethylene, polypropylene, polytetrafluoroethylene and acrylic; unlined expanded or extruded polystyrene plastic foams. Not suitable for permanent water immersion or applications requiring temperature resistance greater than 150°F or below -20°F. Not for use on mirrors, tub and shower surrounds. 

Features

• True all weather subfloor adhesive
• Cold-weather gunnable
• Bridges minor gaps in framing
• Reduces squeaky floors
• Strong adhesion to most building materials

QUAD Invisible

QUAD Invisible offers all the great benefits of QUAD Max and QUAD in a crystal clear invisible formula, perfect for finishing work around stone, brick, and other fine building materials.
 
QUAD Invisible is ideal for sealing around exterior windows and doors, fiber-cement and vinyl siding, PVC trim, roofing, and gutters. Bonds without a primer to most common substrates like cedar, painted or stained woods, fiberglass, vinyl, coated aluminum, steel, metal, brick, stone, and concrete.

For Best Results

Do not use for sealing expansion joints, including butt joints, not compatible with polystyrene foams and polypropylene or polyethylene plastics. Do not use in applications requiring continuous water immersion. Do not use as a traffic bearing sealant, on log homes or inside an occupied structure. For best results, should not be used in applications less than ¼” depth in order to maintain the integrity of the sealant. Do not use to fill nail holes. For joints deeper than 3/8”, a backing material should be used. Tooling, feathering or smearing of the sealant is not necessary or recommended.

Features

• Clear “invisible” formula
• 3x stretch
• All-weather 20°F-120°F application
• Wet or dry surfaces
• Resists dust and dirt
• Paintable
• UV and water resistant – will not yellow or crack
• Permanently flexible
• 3” spout

QUAD MAX Window, Door, & Siding Sealant

QUAD MAX is the toughest construction sealant on the planet. With unmatched 5x stretch, 50% joint movement, proven wet surface application and a fast 24-hour cure, QUAD MAX truly is the next generation of siding and window sealant. Offering maximum durability and maximum application performance for use in any condition.
 
QUAD MAX siding and window sealant is designed for sealing around interior/exterior windows, doors, and siding. It bonds to a wide variety of materials without need for a primer such as fiber cement, cedar, brick, stone, coated aluminum, fiberglass, vinyl, PVC, stucco, EIFS, wood, glass, and flashing tapes and Kynar coatings.

For Best Results

Do not use joints immersed in water or applications requiring continuous water immersion. Do not use as a traffic bearing sealant or in log homes. For joints deeper than 3/8” (9.5mm), a backing material should be used.

Features

• Proven wet surface application
• Better flexibility: 5x stretch & 50% joint movement
• Consistent bead in hot or cold temperatures: 0°F to 140°F application
• 24-hour fast cure for quicker protection
• Paintable in 1 hour
• Strong adhesion to more building materials without primer
• Enhanced UV resistance

QUAD Window, Door, & Siding Sealant

QUAD’s all-season formula and proven wet surface application have positioned it as the leading cold weather construction sealant for exterior windows and door installations, fiber-cement and vinyl siding, PVC trim, roofing and gutters. It bonds without a primer to most common substrates like cedar, painted or stained woods, fiberglass, vinyl, coated aluminum, steel, metal, brick, masonry and concrete.

For Best Results

Do not use for sealing expansion joints, including butt joints. Not compatible with polystyrene foams and polypropylene or polyethylene plastics. Do not use in applications requiring continuous water immersion. Do not use as a traffic bearing sealant, on log homes or inside occupied structures. For best results, should not be used in applications less than 1/4” in depth in order to maintain the integrity of the sealant. Do not use to fill nail holes. For joints deeper than 3/8”, a backing material should be used. Tooling, feathering or smearing of the sealant is not necessary or recommended.

Features

• All-weather, superior performance
• Permanently flexible with 3x stretch
• 20°F – 120°F application
• Wet surface application
• UV and water resistant – will not yellow or crack
• Resists dust and dirt collection
• Paintable
• 4” professional spout

H2U Window, Door, & Siding Sealant

H2U is developed primarily for sealing around exterior window and door frames, sill plates, electrical and plumbing penetrations and other areas where water and air can infiltrate. Ideal for sealing gaps and cracks found on the interior of the home. Works well along baseboards, floors, wall-to-floor joints, around window and door frames, ceiling to wall joints and any other crack or gaps found in and around a home. Works well on vinyl, aluminum and fiber cement siding, brick, concrete, metal, all types of wood, drywall, plaster, plastic moldings, tiles and most common building materials.

For Best Results

Not recommended for the following applications: underwater or permanent water immersion; applications requiring temperature resistance greater than 170°F; exterior use when rain or freezing conditions are expected within 24 hours; butt join applications; unfinished or unprimed fiber cement; mirrors.

Features

• Superior durability
• Permanently flexible
• Indoor/outdoor capabilities
• Easy water clean-up

HM270 Construction Silicone Sealant

HM270 is primarily used for structural or conventional type glazing and curtainwall sealing involving glass, plastic or metal. Also good for sealing skylights, solar panels, ventilators, aluminum siding and windows, heating/air conditioning units, duct work, recreational vehicles and other glass or metal assemblies.

For Best Results

Not recommended for the following applications: Use with concrete, marble, brass, copper, oily woods, limestone, brick, lead surfaces, PTFE, polyethylene, polypropylene, and related materials; joints subject to continuous water immersion (swimming pools); horizontal joints or traffic bearing joints where abrasion resistance is required (walkways, driveways, runways); totally confined or air-free spaces; sealing green or vulcanized rubber; use in potable water systems; direct contact on the reflective coatings on mirrors; applications requiring painting as paint will not adhere to silicone.

Features

• For non-porous materials
• Water-resistant and weather-proof
• Permanently flexible +/-25% joint movement
• Easy extrusion in any weather

RF140 Roof & Flashing Sealant

RF140 is primarily used for bonding roof shingles, flashing and all general roof repairs, making minor repairs inside gutters and downspouts, and is excellent for fixing minor cracks in asphalt surfaces.

For Best Results

Not recommended for use inside occupied structures or in enclosed spaces; use as an expansion joint control sealant; bonding polystyrene foams, polypropylene or polyethylene plastics; continuous water immersion.

Features

• Excellent for general roof repairs
• Resists cracking
• UV and water resistant
• Cold weather and wet surface application
• Remains flexible

SC175 Draft & Acoustical Sound Sealant

SC175 is developed primarily for commercial construction utilizing light weight cavity walls and floor systems. Used successfully in office buildings, hotels, apartment complexes and other types of commercial and residential construction; exposed and unexposed applications at perimeter joints, floor and ceiling runners, cutouts in gypsum board, veneer plaster systems and other areas where a sound rating assembly is required. Can be applied or buttered around all electrical boxes and outlets, cold air returns, heating and air conditioning ducts and other utility equipment penetrating wall surfaces for increased acoustical performance. Works well for sealing sill and base plates in residential construction.

For Best Results

Do not use in underwater applications or permanent water immersion; applications requiring temperature resistance greater than 170°F; use on mirrors and metals that will corrode. One surface must be porous, not for use with two non-porous surfaces. Not recommended for polyethylene, polypropylene, polytetrafluoroethylene (PTFE)/Teflon, nylon, cement board (Durock).

Features

• Designed for sound-rated wall systems
• Permanently flexible
• Easy application and clean up

Flameseal Fire, Smoke, & Draft Stop Sealant

Flameseal is primarily used to service penetrations around pipes, vents, ducts, and joints in horizontal and vertical fire separations. Adheres to wood, gypsum board, concrete, steel, copper, cast iron, and other common building materials. Lab tested and compatible with ABS, PVC, CPVC, PP, PE, and PB plastic materials. Also compatible with all electrical wiring and telecommunication cables listed in the firestop system designs. All other substrates should be submitted to Henkel Technical Service Department for compatibility testing prior to use.

For Best Results

Use this product only on listed systems designs printed in the Underwriters Laboratories and Wamock Hersey fire resistance directories. Not designed to be a waterproof seal. Do not apply if rain is expected within 24 hours, as exposure to rain, running or standing water or snow before the sealant is fully cured may cause it to washout. Not recommended for continuous water submersion or use below the waterline.

Features

• 1, 2, & 3 hour fire resistance rated
• Seals out fumes, smoke and water
• Fills gaps, cracks and holes
• Residential and commercial fire-stopping applications
• Low VOC content qualifies for LEED points and is GREENGUARD approved
• Accepts primer and paint unlike silicone-based sealants

Foam Clean

Foam Clean is a pressurized cleaning solvent used to dissolve uncured or fresh polyurethane foam sealant, for use with the QUAD Foam Applicator Gun.

For Best Results

Will not dissolve cured foam sealant. Do not use can in horizontal position.

Features

• For use with QUAD Window & Door System
• Removes uncured polyurethane foam
• Cleans OSI Foam Applicator Gun
• Evaporates quickly

QUAD Foam Applicator Gun

This specially designed professional use foam applicator gun is for use with foam cans with valves, and the OSI QUAD Foam.

Features

• For use with QUAD Window & Door System
• Detachable screw-on tip
• Instant cut off

QUAD Foam Window & Door Foam Sealant

There is no better protection from air and moisture infiltration than QUAD Foam. As an integral part of the QUAD Window & Door System, QUAD Foam is used to insulate and seal around windows and door frames, keeping the elements out of your install and structure.  It can also be used for jambs, mud sills, header joints, top plate penetrations, electrical and plumbing penetrations, and other areas where air infiltration or heat loss may occur. Bonds most building materials including vinyl, aluminum, fiberglass, wood, OSB, PVC, concrete or metal.

For Best Results

QUAD Foam is not a fire stopping material and should not be used in areas that require fireproof or fire stopping materials. Urethane foams are adversely affected by sunlight (UV light). Exposed foam must be coated with a protective covering or coating. Do not store window and door foam sealant on its side. Does not bond to polyethylene, polytetrafluoroethylene (PTFE)/Teflon or siliconized surfaces. For cold weather applications, product should be stored above 41°F at least 12 hours before application.

Features

• Part of the OSI QUAD Window & Door System
• Low pressure/low expansion – will not warp or deform windows and doors
• Quick setting formulation – can be cut or trimmed in less than 1 hour
• Cold temperature application (14F)
• Insulation value R5/inch
• Closed cell structure does not absorb moisture
• Flexible – will not crack or dry out

Loctite PL Premium Polyurethane Construction Adhesive

Loctite® PL® Premium® Polyurethane Construction Adhesive is a one component, polyurethane based, moisture-curing adhesive. It is VOC compliant and contains no chlorinated solvents or water. Loctite® PL® Premium® provides superior adhesion to most common construction materials. It can be used for interior or exterior projects and is 3X as strong as ordinary construction adhesives. It is also waterproof, paintable and cures even in cold temperatures. Ideal for sub floor installations.

Features

• Great for interior or exterior applications
• Can be applied directly to dry, wet, or frozen lumber
• No strong solvent odor
• Permanently bonds together almost any substrate
• Stronger than many substrates it joins together; Up to 3x the strength of ordinary adhesives
• Suitable for use in hot and cold environments
• Low VOC content
• Waterproof
• Broad Service Temperature

Loctite PL 200 Projects Construction Adhesive

Loctite® PL 200 Projects Construction Adhesive is a premium grade adhesive for paneling, drywall and other light construction, inside or outside. The low VOC formulation meets stringent State and Federal VOC Regulations.

Features

• Non-flammable, environmentally friendly
• Great for indoor projects – no strong solvent odor
• Provides a strong, durable bond to multiple surfaces
• Will bridge minor gaps when bonding irregular surfaces
• Eliminates the use of harsh cleaning chemicals
• Reduces nailing and fastener requirements by up to 50%
• Ultra low VOC content
• Water-based adhesive
• Bonds to most building materials
• Easy cleanup with water (uncured adhesive)
• High grab

Loctite PL 300 VOC Foamboard Adhesive

PL 300 Low VOC Foamboard Adhesive is a premium grade formulation for bonding foamboard insulation to a variety of surfaces, interior or exterior. It is compatible with all other foamboard insulation products. PL 300 VOC is a latex-based adhesive especially designed for bonding polystyrene foam to itself or to a variety of construction materials, including, but not limited to: wood, gypsum board, concrete and brick. Low VOC formulation meets stringent State and Federal VOC Regulations.

Features

• Will not attack or burn through foamboard (if used as directed)
• Great for indoor or outdoor projects
• Provides a strong, durable bond to multiple surfaces
• Will bridge minor gaps when bonding irregular surfaces
• Reduces the use of fasteners
• Foamboard compatible
• Low VOC formula
• Water and weather resistant
• Bonds to most building materials
• Gap filling
• High grab

Loctite PL 400 VOC Subfloor & Deck Adhesive

Loctite® PL 400 VOC Compliant Subfloor & Deck Adhesive provides a powerful, permanent bond and is formulated for all heavy-duty interior or exterior construction. Cold weather formula for easier extrusion and excellent adhesion in all weather conditions. Bonds dry, wet, frozen and treated lumber to most building materials. Offers fast set and superior strength and development. Low VOC formulation meets stringent State and Federal VOC regulations.

Features

• Great for indoor or outdoor use
• No “roll up” on frozen lumber
• Can be applied directly to dry, wet, or frozen lumber
• Provides a strong, durable bond to multiple surfaces
• Will bridge minor gaps when bonding irregular surfaces – Reduces squeaking or splitting
• Waterproof and weather resistant
• Cold weather gunnable
• Bonds to most building materials
• Gap filling

Loctite 100% Silicone

Loctite® Polyseamseal 100% Silicone Sealant is a 100% silicone formulation that creates a tough, watertight, mildew resistant seal. It makes fast work of sealing your kitchen and bath and has a fast-dry system that withstands water contact 2 hours after application. Polyseamseal 100% Silicone withstands temperature extremes of -65°F to 300°F making it ideal for heating and cooling (HVAC) applications and is highly resistant to ultraviolet light and other environmental elements. It forms a weatherproof bond to materials like glass, ceramics, aluminum, primed steel, and some plastics.

Features

• Inhibits mold & mildew growth on caulk surface
• Can shower in 2 hours
• Ideal for humid or steamy areas
• One-time application
• Fast dry silicone system
• Water resistant
• No cracking, peeling, or shrinking

Loctite Painter’s Caulk

Loctite® Painter’s Caulk is a quality latex sealant designed for interior applications. It is a 100% acrylic based caulk that seals out air, moisture, dirt and dust. Accepts minimal joint movement. Can be painted over with oil or acrylic paints within 1 hour. Soap and water clean-up.

Features

• Paintable within 1 hour
• Inhibits mold and mildew growth on caulk surface
• Uncured adhesive cleans up easily with soap and water
• Ideal for interior applications in occupied structures
• Mold and mildew resistant
• Low odor

Loctite Polyseamseal All Purpose Adhesive Caulk

Loctite® Polyseamseal All Purpose Adhesive Caulk is formulated for sealing most indoor projects in and around the house. The Seal & Bond technology provides increased durability for a long lasting, flexible seal. Loctite Polyseamseal All Purpose is easy to apply and tool and the cured product is weather-resistant, mold and mildew resistant and paintable in 40 minutes.

Features

• Possesses both bonding and sealing capabilities
• Long-lasting, professional finish
• Inhibits mold and mildew growth
• Uncured adhesive cleans up easily with soap and water
• Ideal for humid and steamy areas
• Low odor, non-flammable
• 2-in-1 product
• Permanently flexible and durable
• Mold and mildew resistant and water resistant
• Paintable and durable
• Water-based adhesive

Loctite Acrylic Caulk with Silicone

Loctite® Polyseamseal Acrylic Caulk with Silicone is a high quality acrylic caulk with added silicone to give extra durability and adhesion. Its fast set formulation is paintable within 30 minutes and provides a flexible seal that locks out air, moisture, dirt, dust and insects.

Features

• Non-flammable and environmentally friendly
• Eliminates the use of harsh cleaning chemicals
• Ideal for indoor projects
• Paintable in 30 minutes
• Ultra low VOC content
• Water-based adhesive
• Easy cleanup with water (uncured adhesive)
• Low odor